China factory Drive Shaft with Center Bearing for CHINAMFG

Product Description

model Using  application materials
6 19.05 0.7500 45.245 1.7813 13.52 0.5223 1.0 15.9 7.9 7 9.525 14000 17000 0.083
B32-10
-C5
32 1.2598 72 2.8346 19 0.7480 1.1 26.7 15.0 8 12.000 10000 12000 0.322
K2607 35 1.3780 72 2.8346 17 0.6693 1.1 25.7 15.3 9 11.112 9800 11000 0.281

 

 

ID  MODEL     NTN     (dxDxB/b) (kg)  
 1  628/5X2-2ZWB  628/5X2-2ZWB  2280085          5×11×3.5/4.3  
 2  619/2.5X1WB/YA  259009/2.5K          2.5×9×2.5/3  –  
 3  619/3-2ZWB  1280093          3×8×3/3.8  –  
 4  61910X3-2RZN/WB            50×83×  /13  
 5  629/1.5X2-2ZWB  228009/1.5          1.5×5×2.5/3  –  
 6  6005WB1-Z  265715K          25×47×  /12  
 7  60140X2WB1M  590740H          200×340×37/43  15.9  
 8  6202X2WB-2Z            12×32×  /16  
 9  6204WB1-Z  260704K          20×47×  /15  
 10  6204WB-Z/YA  280704K          20×47×  /15  
 11  6211WB-2Z  285711K          55×100×  /21  
 12  6212WB-2Z  285712          60×110×  /36  
 13  6212WB-Z  285712K          60×110×  /22  

 

BRAND MODEL (d) (D) (b) Cr(N) Cor(N)  
open zz    
*1000rpm
681 1 3 1 96 26 130 150
691 4 1.6 141 37 100 120
681Xzz 1.5 4 1.2 2 112 33 100 120
691Xzz 5 2 2.6 169 50 85 100
601Xzz 6 2.5 3 330 99 75 90
682zz  

2

5 1.5 2.3 169 50 85 100
MR52zz 5 2 2.5 169 50 85 100
692zz 6 2.3 3 330 99 75 90
MR62zz 6 2.5 2.5 330 99 75 90
MR72zz 7 2.8 3 386 129 63 75
602zz 7 2.8 3.5 386 129 60 71
682Xzz  
2.5
6 1.8 2.6 209 74 71 80
692Xzz 7 2.5 3.5 386 129 63 75
MR82X 8 2.5 558 180 60 67
602Xzz 8 2.8 4 552 177 60 71
MR63zz  
 
3
6 2 2.5 209 74 71 80
683zz 7 2 3 311 112 63 75
MR83zz 8 2.5 3 395 141 60 67
693zz 8 3 4 558 180 60 67
MR93zz 9 2.5 4 571 189 56 67
603zz 9 3 5 571 189 56 67
623zz 10 4 4 631 219 50 60
633zz 13 5 5 1301 488 40 48
MR74zz  
 
4
7 2 2.5 255 108 60 67
MR84zz 8 2 3 395 141 56 67
684zz 9 2.5 4 641 227 53 63
MR104zz 10 3 4 711 272 48 56
694zz 11 4 4 957 350 48 56
604zz 12 4 4 957 350 48 56
624zz 13 5 5 1301 488 40 48
634zz 16 5 5 1340 523 36 43
MR85zz  
 
5
8 2 2.5 218 90 53 63
MR95zz 9 2.5 3 431 169 50 60
MR105zz 10 3 4 431 169 50 60
MR115zz 11 4 716 282 45 53
685zz 11 3 5 716 282 45 53
695zz 13 4 4 1077 432 43 50
605zz 14 5 5 1329 507 40 50
625zz 16 5 5 1729 675 36 43
635zz 19 6 6 2336 896 32 40
MR106zz  
 
6
10 2.5 3 496 218 45 53
MR126zz 12 3 4 716 295 43 50
686zz 13 3.5 5 1082 442 40 50
696zz 15 5 5 1340 523 40 45
606zz 17 6 6 2263 846 38 45
626zz 19 6 6 2336 896 32 40
636zz 22 7 7 3333 1423 30 36
MR117zz  
 
7
11 2.5 3 455 202 43 50
MR137zz 13 3 4 541 276 40 48
687zz 14 3.5 5 1173 513 40 50
697zz 17 5 5 1605 719 36 43
607zz 19 6 6 2336 896 36 43
627zz 22 7 7 3287 1379 30 36
637zz 26 9 6 4563 1983 28 34
MR128zz  

8

12 2.5 3.5 543 274 40 48
MR148zz 14 3.5 4 817 386 38 45
688zz 16 4 5 1252 592 36 43
698zz 19 6 6 2237 917 36 43
608z 22 7 7 3293 1379 34 40
628zz 24 8 8 3333 1423 28 34
638zz 28 9 9 4563 1983 28 34
679zz  
9
14 3 4.5 919 468 36 42
689zz 17 4 5 1327 668 36 43
699zz 20 6 6 2467 1081 34 40
609zz 24 7 7 3356 1444 32 38
629zz 26 8 8 4575 1983 28 34
639zz 30 10 10 4659 2080 24 30
6700zz  

10

15 4 4 855 435 15 17
6800zz 19 5 5 1716 840 37 43
6900zz 22 6 6 2695 1273 34 41
6000zz 26 8 8 4550 1970 30 36
6200zz 30 9 9 5100 2390 24 30
6300zz 35 11 11 8100 3450 22 26
6701zz  
12
18 4 4 926 530 13 15
6801zz 21 5 5 1915 1041 33 39
6901zz 24 6 6 2886 1466 31 36
6001zz 28 8 8 5100 2370 28 32
6201zz 32 10 10 6800 3050 22 28
6301zz 37 12 12 9700 4200 990 425

  

  MODEL      
MODEL NMB ADR NTN GRW RMB   NMB ADR NTN GRW RMB
681 L310 AX1 681 681 UL103       W681ZZA    
691 R410   691 691         W691ZZA 691-2Z  
681X L415 AX1.5 68/1.5 68/1.5 UL154 681XZZ L415ZZ AX1.5ZZ W68/1.5ZZA 68/1.5-2Z ULZ154
691X R515 X1.5 69/1.5 69/1.5 R1550 691XZZ R515ZZ X1.5ZZ W69/1.5ZZA 69/1.5-2Z  
601X R615   60/1.5     601XZZ R615ZZ   W60/1.5ZZA    
682 L520 BX2 682 682 UL205 682ZZ L520ZZ BX2ZZ W682ZZA 682-2Z ULZ205
692 R620 AX2 692 692 R2060 692ZZ R620ZZ AX2ZZ W692ZZA 692-2Z RF206
602 R720 602 602     602ZZ R720ZZ 602ZZ W602ZZA    
682X L625 AX2.5 68/2.5 68/2.5 UL256 682XZZ L625ZZ AX2.5ZZ W68/2.5ZZA 68/2.5-2Z ULZ256
692X R725 X2.5 69/2.5 69/2.5 R2570 692XZZ R725ZZ X2.5ZZ W69/2.5ZZA 69/2.5-2Z  
602X R825 60/2.5 60/2.5 60/2.5 R2580 602XZZ R825ZZ   W60/2.5ZZA 60/2.5-2Z RF258
683 L730 AX3 683 683 UL307 683ZZ L730ZZ AX3ZZ W683ZZA 683-2Z ULZ307
693 R830 619/3 693 693 R3080 693ZZ R830ZZ 619/3ZZ W693ZZ 693-2Z RF308
603 R930 603 603     603ZZ R930ZZ 603ZZ W603ZZ    
623 R1030 623 623 623 R3100 623ZZ R1030ZZ 623ZZ 623ZZ 623-2Z RF310
633     633     633ZZ          
684 L940 AX4 684 684 UL409 684ZZ L940ZZ AX4ZZ W684ZZ 684-2Z ULZ409
694 R1140 AY4 694 694   694ZZ R1140ZZ AY4ZZ 694ZZ 694-2Z  
604 R1240 604 604     604ZZ R1240ZZ 604ZZ 604ZZ    
624 R1340 624 624 624 R4130 624ZZ R1340ZZ 624ZZ 624ZZ 624-2Z RF413
634 R1640 634 634 634 R4160 634Z R1640ZZ 634ZZ 634ZZ 634-2Z RV416
685 L1150 X5 685 685 UL511 685ZZ L1150ZZ X5ZZ W685ZZ 685-2Z ULZ511
695 R1350 AY5 695 695 R5130 695ZZ R1350ZZ AY5ZZ 695ZZ 695-2Z RX513
605 R1450 605 605 605   605ZZ R1450ZZ 605ZZ 605ZZ    
625 R1650 625 625 625 R5160 625ZZ R1650ZZ 625ZZ 625ZZ 625-2Z RV516
686 L1360 AX6 686 686 UL613 686ZZ L1360ZZ AX6ZZ W686ZZ 686-2Z ULZ613
696 R1560 AY6 696 696   696ZZ R1560ZZ AY6ZZ 696ZZ 696-2Z  
606 R1760 606 606 606   606ZZ R1760ZZ 606ZZ 606ZZ    
626 R1960 626 626 626 R6190 626ZZ R1960ZZ 626ZZ 626ZZ 626-2Z RV619
687 L1470 AX7 687 687 UL714 687ZZ L1470ZZ AX7ZZ W687ZZ 687-2Z ULZ714
697 R1770 AY7 697 697   697ZZ R1770ZZ AY7ZZ 697ZZ 697-2Z  
607 R1970 607 607 607 R7190 607ZZ R1970ZZ 607ZZ 607ZZ 607-2Z RV710
627 R2270 627 627 627 R7220 627ZZ R2270ZZ 627ZZ 627ZZ 627-2Z RV722
688 L1680 X8 688 688 UL816 688ZZ L1680ZZ X8ZZ W688ZZ   ULZ816
698 R1980 AY8 698 698   698ZZ R1980ZZ AY8ZZ 698ZZ 698-2Z  
608 R2280 608 608 608 R8220 608ZZ R2280ZZ 608ZZ 608ZZ 608-2Z RV822
689 L1790 X9 689 689 UL917 689ZZ L1790ZZ X9ZZ W689ZZ   ULZ917
699 L2090 AY9 699 699   699ZZ L2090ZZ AY9ZZ 699ZZ 699-2Z  
629 R2690 629 629 629   629ZZ R2690ZZ 629ZZ   629-2Z  
6800 L1910 X10   S6300   6800ZZ L1910ZZ X10ZZ   S6800/002-2Z  
63800           63800ZZ   63800ZZ   S6800-2Z  
6900   AY10   S6900   6900ZZ   AY10ZZ   S6900-2Z  
6000 R2610 6000 6000 6000   6000ZZ R2610ZZ 6000ZZ   6000-2Z  
6901   AY12       6901ZZ   AY12ZZ    

MR
Miniature bearings
MODEL
         
 MODEL NMB ADR NTN   NMB ADR NTN
MR31 L310W51     MR31ZZ      
MR41X R412     MR41ZZ      
MR52 L520W02     MR52ZZ L520ZZW52    
MR62 R620W52     MR62ZZ R620ZZY52    
MR72 R720Y52     MR72ZZ R720ZZY03    
MR82X R825Y52     MR82XZZ      
MR63 L630 617/3 673 MR63ZZ L630ZZ   W673ZZA
MR83 R830Y52 X3   MR83ZZ   X3ZZ  
MR93 R930Y52     MR93ZZ R930ZZY04    
MR74 L740 617/4 674 MR74ZZ L740ZZ    
MR84 L840     MR84ZZ L840ZZ    
MR104 L1040 X4   MR104ZZ L1040ZZ X4ZZ  
MR85 L850   675 MR85ZZ L850ZZ    
MR95 L950     MR95ZZ L950ZZ    
MR105 L1050     MR105ZZ L1050ZZ    
MR106 L1060   676 MR106ZZ L1060ZZ    
MR126 L1260 X6   MR126ZZ L1260ZZ X6ZZ  
MR117 L1170   677 MR117ZZ L1170ZZ    
MR137 L1370     MR137ZZ L1370ZZ    
MR128 L1280   678 MR128ZZ L1280ZZ    
MR148 L1480     MR148ZZ L1480ZZ    
MF41X RF412     MF41XZZ RF412ZZ    
MF52 LF520W52     MF52ZZ LF520ZZW52    
MF62 RF620W52     MF62ZZ      
MF72 RF720Y52     MF72ZZ RF720ZZY03    
MF82X RF825Y52     MF82ZZ      
MF63 LF630     MF63ZZ LF630ZZ    
MF83 RF830Y52     MF83ZZ      
MF93 RF930Y52     MF93ZZ RF930ZZY04    
MF74 LF740     MF74ZZ LF740ZZ    
MF84 LF840     MF84ZZ LF840ZZ    
MF104 LF1040     MF104ZZ LF1040ZZ    
MF85 LF850     MF85ZZ LF850ZZ    
MF95 LF950     MF95ZZ LF950ZZ    
MF105 LF1050     MF105ZZ LF1050ZZ    
MF106 LF1060     MF106ZZ LF1060ZZ    
MF126 LF1260     MF126ZZ LF1260ZZ    
MF117 LF1170     MF117ZZ LF1170ZZ    
MF137 LF1370     MF137ZZ LF1370ZZ    
MF128 LF1280     MF128ZZ LF1280ZZ    
MF148 LF1480     MF148ZZ LF1480ZZ

  (d) (D) (D1) (b) (c) Cr(N) Cor(N)  
open zz open zz open zz    
*1000rpm
F682zz

 

2

5 6.1 1.5 2.3 0.5 0.6 169 50 85 100
MF52zz 5 6.2 2 2.5 0.6 0.6 169 50 85 100
F692zz 6 7.5 2.3 3 0.6 0.8 330 99 75 90
MF62zz 6 7.2 2.5 2.5 0.6 330 99 75 90
MF72zz 7 8.2 2.8 3 0.6 0.6 386 129 63 75
F602zz 7 8.5 2.8 3.5 0.7 0.9 386 129 60 71
F682Xzz

2.5

6 7.1 1.8 2.6 0.5 0.8 209 74 71 80
F692Xzz 7 8.5 2.5 3.5 0.7 0.9 386 129 63 75
MF82X 8 9.2 2.5 0.6 558 180 60 67
F602Xzz 8 9.5 2.8 4 0.7 0.9 552 177 60 71
MF63zz

 

 

3

6 7.2 2 2.5 0.6 0.6 209 74 71 80
F683zz 7 8.1 2 3 0.5 0.8 311 112 63 75
MF83zz 8 9.2 2.5 3 0.6 395 141 60 67
F693zz 8 9.5 3 4 0.7 0.9 558 180 60 67
MF93zz 9 10.2 10.6 2.5 4 0.6 0.8 571 189 56 67
F603zz 9 10.5 3 5 0.7 571 189 56 67
F623zz 10 11.5 4 4 1 1 631 219 50 60
MF74zz

 

 

4

7 8.2 2 2.5 0.6 0.6 255 108 60 67
MF84zz 8 9.2 2 3 0.6 0.6 395 141 56 67
F684zz 9 10.3 2.5 4 0.6 1 641 227 53 63
MF104zz 10 11.2 11.6 3 4 0.6 0.8 711 272 48 56
F694zz 11 12.5 4 4 1 1 957 350 48 56
F604zz 12 13.5 4 4 1 1 957 350 48 56
F624zz 13 15 5 5 1 1 1301 488 40 48
F634zz 16 18 5 5 1 1 1340 523 36 43
MF85zz

 

 

5

8 9.2 2 2.5 0.6 0.6 218 90 53 63
MF95zz 9 10.2 2.5 3 0.6 0.6 431 169 50 60
MF105zz 10 11.2 11.6 3 4 0.6 0.8 431 169 50 60
MF115zz 11 12.5 4 0.8 1 716 282 45 53
F685zz 11 12.5 3 5 0.8 1 716 282 45 53
F695zz 13 15 4 4 1 1 1077 432 43 50
F605zz 14 16 5 5 1 1 1329 507 40 50
F625zz 16 18 5 5 1 1 1729 675 36 43
F635zz 19 22 6 6 1.5 1.5 2336 896 32 40
MF106zz

 

6

10 11.2 2.5 3 0.6 0.6 496 218 45 53
MF126zz 12 13.2 13.6 3 4 0.6 0.8 716 295 43 50
F686zz 13 15 3.5 5 1 1.1 1082 442 40 50
F696zz 15 17 5 5 1.2 1.2 1340 523 40 45
F606zz 17 19 6 6 1.2 1.2 2263 846 38 45
F626zz 19 22 6 6 1.5 1.5 2336 896 32 40
MF117zz

7

11 12.2 2.5 3 0.6 0.6 455 202 43 50
MF137zz 13 14.2 14.6 3 4 0.6 0.8 541 276 40 48
F687zz 14 16 3.5 5 1 1.1 1173 513 40 50
F697zz 17 19 5 5 1.2 1.2 1605 719 36 43
F607zz 19 22 6 6 1.5 1.5 2336 896 36 43
F627zz 22 25 7 7 1.5 1.5 3287 1379 30 36
MF128zz

8

12 13.2 13.6 2.5 3.5 0.6 0.8 543 274 40 48
MF148zz 14 15.6 3.5 4 0.8 0.8 817 386 38 45
F688zz 16 18 4 5 1 1.1 1252 592 36 43
F698zz 19 22 6 6 1.5 1.5 2237 917 36 43
F608zz 22 25 7 7 1.5 1.5 3293 1379 34 40
F689zz

9

17 19 4 5 1 1.1 1327 668 36 43
F699zz 20 23 6 6 1.5 1.5 2467 1081 34 40
F6700zz

10

15 16.5 16.5 3 4 0.8 0.8 850 430 14 16
F6800zz 19 21 5 5 1 1 1700 800 35 42
F6900zz 22 25 6 6 1.5 1.5 2611 1223 31 40
F6701zz

12

18 19.5 19.5 4 4 0.8 0.8 922 512 12 14
F6801zz 21 23 5 5 0.8 1 1911 1041 33 39
F6901zz 24 26.5 6 6 1 1.5 2831 1411 31 36

()

 

  (d) (D) (D1) (b) (c) Cr(N) Cor(N)  
open zz open zz    
*1000rpm
FR1-4zzs 1.984 6.35 7.518 2.38 3.571 0.584 0.787 284 96 67 80
FR133zz 2.38 4.762 5.944 1.588 2.38 0.457 0.787 144 53 80 95
FR1-5zzs

 

3.175

7.938 9.119 2.779 3.571 0.584 0.787 552 176 60 71
FR144zzs 6.35 7.518 2.38 2.779 0.584 0.787 284 96 67 80
FR2-5zz 7.938 9.119 2.779 3.571 0.584 0.787 558 180 60 67
FR2-6zzs 9.525 10.719 2.779 3.571 0.584 0.787 640 227 53 63
FR2zz 9.525 11.176 3.967 3.967 0.762 0.762 631 219 56 67
FE155zzs 3.967 7.938 9.119 2.779 3.175 0.584 0.914 359 150 53 63
FR156zzs 4.762 7.938 9.119 2.779 3.175 0.584 0.914 359 150 53 63
FR166zz 9.525 10.719 3.175 3.175 0.584 0.787 709 272 50 60
FR3zz

6.35

12.7 14.351 4.978 4.978 1.067 1.067 1301 488 43 53
FR168zzs 9.525 10.719 3.175 3.175 0.584 0.914 373 172 48 56
FR188zz 12.7 13.894 3.175 4.762 0.584 1.143 1082 442 40 50
FR4zz 15.875 17.526 4.978 4.978 1.067 1.067 1480 621 38 45
FR1810zzs 7.938 12.7 13.894 3.967 3.967 0.787 0.787 542 276 40 48
FR6zz 9.525 22.225 24.613 5.558 7.142 1.57 1.57 3332 1422 32 38

FM

  d D d1 D1 H Cr(N) Cor(N)    
rpm
       
F3-8M 3 8 3.2 7.8 3.5 600 480 11000 15000 6 1.588
F4-9M 4 9 4.2 8.8 4 800 520 8000 12000 6 1.588
F4-10M 4 10 4.2 9.8 4 658 580 6000 10000 6 1.588
F5-10M 5 10 5.2 9.8 4 950 830 5100 8100 7 1.588
F5-11M 5 11 5.2 10.8 4.5 988 880 5000 8000 7 1.588
F5-12M 5 12 5.2 11.8 4 988 880 5000 8000 7 1.588
F6-12M 6 12 6.2 11.8 4.5 1600 1255 5000 7000 8 2
F6-14M 6 14 6.25 13.8 5 1800 1588 4000 7000 8 2.381
F7-13M 7 13 7.2 16.8 4.5 1422 1255 4000 7000 9 2
F7-15M 7 15 7.2 14.8 5 2200 2000 3600 7100 8 2.5
F7-17M 7 17 7.2 16.8 6 2600 2256 3500 7000 8 2.381
F8-16M 8 16 8.2 15.8 5 2500 3000 4000 8000 9 3
F8-19M 8 19 8.2 18.8 7 3452 3000 3000 5000 8 3.175
F9-20M 9 20 9.2 19.8 7 3356 2999 2500 4500 8 3.175
F10-18M 10 18 10.2 17.8 5.5 2230 2721 2500 4500 10 2.381

F (without groove)

  d D d1 D1 H Cr(N) Cor(N)  
   
F2-6 2 6 2 6 3 117 83 6 1
F2X-7 2.5 7 2.5 7 3.5 156 117 6 1.2
F3-8 3 8 3.2 7.8 3.5 600 480 6 1.588
F4-9 4 9 4.2 8.8 4 800 520 6 1.588
F4-10 4 10 4.2 9.8 4 658 580 6 1.588
F5-11 5 11 5.2 10.8 4.5 988 880 7 1.588
F6-12 6 12 6.2 11.8 4.5 1600 1255 8 2
F7-15 7 15 7.2 14.8 5 2200 2000 8 2.5
F8-16 8 16 8.2 15.8 5 2500 3000 9 3
F9-17 9 17 9.2 16.8 5 578 627 10 2.381
F10-18 10 18 10.2 17.8 5.5 2230 2721 10 2.381

Q: Are you trading company or manufacturer ?
A: We are a trading company specializing in exporting bearings
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days
if the
goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge
Q.You provide free consultation service?
Yes, before, during and after order, anytime.

Certification: CCC, COP, ISO9001, CE, E-Mark, RoHS, TS16949
Standard Component: Standard Component
Technics: Press
Material: Iron
Type: Engine Oil Pump
Lead Time: 30-60 Days
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pto shaft

What factors should be considered when selecting the right drive shaft for an application?

When selecting the right drive shaft for an application, several factors need to be considered. The choice of drive shaft plays a crucial role in ensuring efficient and reliable power transmission. Here are the key factors to consider:

1. Power and Torque Requirements:

The power and torque requirements of the application are essential considerations. It is crucial to determine the maximum torque that the drive shaft will need to transmit without failure or excessive deflection. This includes evaluating the power output of the engine or power source, as well as the torque demands of the driven components. Selecting a drive shaft with the appropriate diameter, material strength, and design is essential to ensure it can handle the expected torque levels without compromising performance or safety.

2. Operating Speed:

The operating speed of the drive shaft is another critical factor. The rotational speed affects the dynamic behavior of the drive shaft, including the potential for vibration, resonance, and critical speed limitations. It is important to choose a drive shaft that can operate within the desired speed range without encountering excessive vibrations or compromising the structural integrity. Factors such as the material properties, balance, and critical speed analysis should be considered to ensure the drive shaft can handle the required operating speed effectively.

3. Length and Alignment:

The length and alignment requirements of the application must be considered when selecting a drive shaft. The distance between the engine or power source and the driven components determines the required length of the drive shaft. In situations where there are significant variations in length or operating angles, telescopic drive shafts or multiple drive shafts with appropriate couplings or universal joints may be necessary. Proper alignment of the drive shaft is crucial to minimize vibrations, reduce wear and tear, and ensure efficient power transmission.

4. Space Limitations:

The available space within the application is an important factor to consider. The drive shaft must fit within the allocated space without interfering with other components or structures. It is essential to consider the overall dimensions of the drive shaft, including length, diameter, and any additional components such as joints or couplings. In some cases, custom or compact drive shaft designs may be required to accommodate space limitations while maintaining adequate power transmission capabilities.

5. Environmental Conditions:

The environmental conditions in which the drive shaft will operate should be evaluated. Factors such as temperature, humidity, corrosive agents, and exposure to contaminants can impact the performance and lifespan of the drive shaft. It is important to select materials and coatings that can withstand the specific environmental conditions to prevent corrosion, degradation, or premature failure of the drive shaft. Special considerations may be necessary for applications exposed to extreme temperatures, water, chemicals, or abrasive substances.

6. Application Type and Industry:

The specific application type and industry requirements play a significant role in drive shaft selection. Different industries, such as automotive, aerospace, industrial machinery, agriculture, or marine, have unique demands that need to be addressed. Understanding the specific needs and operating conditions of the application is crucial in determining the appropriate drive shaft design, materials, and performance characteristics. Compliance with industry standards and regulations may also be a consideration in certain applications.

7. Maintenance and Serviceability:

The ease of maintenance and serviceability should be taken into account. Some drive shaft designs may require periodic inspection, lubrication, or replacement of components. Considering the accessibility of the drive shaft and associated maintenance requirements can help minimize downtime and ensure long-term reliability. Easy disassembly and reassembly of the drive shaft can also be beneficial for repair or component replacement.

By carefully considering these factors, one can select the right drive shaft for an application that meets the power transmission needs, operating conditions, and durability requirements, ultimately ensuring optimal performance and reliability.

pto shaft

How do drive shafts enhance the performance of automobiles and trucks?

Drive shafts play a significant role in enhancing the performance of automobiles and trucks. They contribute to various aspects of vehicle performance, including power delivery, traction, handling, and overall efficiency. Here’s a detailed explanation of how drive shafts enhance the performance of automobiles and trucks:

1. Power Delivery:

Drive shafts are responsible for transferring power from the engine to the wheels, enabling the vehicle to move forward. By efficiently transmitting power without significant losses, drive shafts ensure that the engine’s power is effectively utilized, resulting in improved acceleration and overall performance. Well-designed drive shafts with minimal power loss contribute to the vehicle’s ability to deliver power to the wheels efficiently.

2. Torque Transfer:

Drive shafts facilitate the transfer of torque from the engine to the wheels. Torque is the rotational force that drives the vehicle forward. High-quality drive shafts with proper torque conversion capabilities ensure that the torque generated by the engine is effectively transmitted to the wheels. This enhances the vehicle’s ability to accelerate quickly, tow heavy loads, and climb steep gradients, thereby improving overall performance.

3. Traction and Stability:

Drive shafts contribute to the traction and stability of automobiles and trucks. They transmit power to the wheels, allowing them to exert force on the road surface. This enables the vehicle to maintain traction, especially during acceleration or when driving on slippery or uneven terrain. The efficient power delivery through the drive shafts enhances the vehicle’s stability by ensuring balanced power distribution to all wheels, improving control and handling.

4. Handling and Maneuverability:

Drive shafts have an impact on the handling and maneuverability of vehicles. They help establish a direct connection between the engine and the wheels, allowing for precise control and responsive handling. Well-designed drive shafts with minimal play or backlash contribute to a more direct and immediate response to driver inputs, enhancing the vehicle’s agility and maneuverability.

5. Weight Reduction:

Drive shafts can contribute to weight reduction in automobiles and trucks. Lightweight drive shafts made from materials such as aluminum or carbon fiber-reinforced composites reduce the overall weight of the vehicle. The reduced weight improves the power-to-weight ratio, resulting in better acceleration, handling, and fuel efficiency. Additionally, lightweight drive shafts reduce the rotational mass, allowing the engine to rev up more quickly, further enhancing performance.

6. Mechanical Efficiency:

Efficient drive shafts minimize energy losses during power transmission. By incorporating features such as high-quality bearings, low-friction seals, and optimized lubrication, drive shafts reduce friction and minimize power losses due to internal resistance. This enhances the mechanical efficiency of the drivetrain system, allowing more power to reach the wheels and improving overall vehicle performance.

7. Performance Upgrades:

Drive shaft upgrades can be a popular performance enhancement for enthusiasts. Upgraded drive shafts, such as those made from stronger materials or with enhanced torque capacity, can handle higher power outputs from modified engines. These upgrades allow for increased performance, such as improved acceleration, higher top speeds, and better overall driving dynamics.

8. Compatibility with Performance Modifications:

Performance modifications, such as engine upgrades, increased power output, or changes to the drivetrain system, often require compatible drive shafts. Drive shafts designed to handle higher torque loads or adapt to modified drivetrain configurations ensure optimal performance and reliability. They enable the vehicle to effectively harness the increased power and torque, resulting in improved performance and responsiveness.

9. Durability and Reliability:

Robust and well-maintained drive shafts contribute to the durability and reliability of automobiles and trucks. They are designed to withstand the stresses and loads associated with power transmission. High-quality materials, appropriate balancing, and regular maintenance help ensure that drive shafts operate smoothly, minimizing the risk of failures or performance issues. Reliable drive shafts enhance the overall performance by providing consistent power delivery and minimizing downtime.

10. Compatibility with Advanced Technologies:

Drive shafts are evolving in tandem with advancements in vehicle technologies. They are increasingly being integrated with advanced systems such as hybrid powertrains, electric motors, and regenerative braking. Drive shafts designed to work seamlessly with these technologies maximize their efficiency and performance benefits, contributing to improved overall vehicle performance.

In summary, drive shafts enhance the performance of automobiles and trucks by optimizing power delivery, facilitating torque transfer, improving traction and stability, enhancing handling and maneuverability, reducing weight, increasing mechanical efficiency,and enabling compatibility with performance upgrades and advanced technologies. They play a crucial role in ensuring efficient power transmission, responsive acceleration, precise handling, and overall improved performance of vehicles.pto shaft

What is a drive shaft and how does it function in vehicles and machinery?

A drive shaft, also known as a propeller shaft or prop shaft, is a mechanical component that plays a critical role in transmitting rotational power from the engine to the wheels or other driven components in vehicles and machinery. It is commonly used in various types of vehicles, including cars, trucks, motorcycles, and agricultural or industrial machinery. Here’s a detailed explanation of what a drive shaft is and how it functions:

1. Definition and Construction: A drive shaft is a cylindrical metal tube that connects the engine or power source to the wheels or driven components. It is typically made of steel or aluminum and consists of one or more tubular sections with universal joints (U-joints) at each end. These U-joints allow for angular movement and compensation of misalignment between the engine/transmission and the driven wheels or components.

2. Power Transmission: The primary function of a drive shaft is to transmit rotational power from the engine or power source to the wheels or driven components. In vehicles, the drive shaft connects the transmission or gearbox output shaft to the differential, which then transfers power to the wheels. In machinery, the drive shaft transfers power from the engine or motor to various driven components such as pumps, generators, or other mechanical systems.

3. Torque and Speed: The drive shaft is responsible for transmitting both torque and rotational speed. Torque is the rotational force generated by the engine or power source, while rotational speed is the number of revolutions per minute (RPM). The drive shaft must be capable of transmitting the required torque without excessive twisting or bending and maintaining the desired rotational speed for efficient operation of the driven components.

4. Flexible Coupling: The U-joints on the drive shaft provide a flexible coupling that allows for angular movement and compensation of misalignment between the engine/transmission and the driven wheels or components. As the suspension system of a vehicle moves or the machinery operates on uneven terrain, the drive shaft can adjust its length and angle to accommodate these movements, ensuring smooth power transmission and preventing damage to the drivetrain components.

5. Length and Balance: The length of the drive shaft is determined by the distance between the engine or power source and the driven wheels or components. It should be appropriately sized to ensure proper power transmission and avoid excessive vibrations or bending. Additionally, the drive shaft is carefully balanced to minimize vibrations and rotational imbalances, which can cause discomfort, reduce efficiency, and lead to premature wear of drivetrain components.

6. Safety Considerations: Drive shafts in vehicles and machinery require proper safety measures. In vehicles, drive shafts are often enclosed within a protective tube or housing to prevent contact with moving parts and reduce the risk of injury in the event of a malfunction or failure. Additionally, safety shields or guards are commonly installed around exposed drive shafts in machinery to protect operators from potential hazards associated with rotating components.

7. Maintenance and Inspection: Regular maintenance and inspection of drive shafts are essential to ensure their proper functioning and longevity. This includes checking for signs of wear, damage, or excessive play in the U-joints, inspecting the drive shaft for any cracks or deformations, and lubricating the U-joints as recommended by the manufacturer. Proper maintenance helps prevent failures, ensures optimal performance, and prolongs the service life of the drive shaft.

In summary, a drive shaft is a mechanical component that transmits rotational power from the engine or power source to the wheels or driven components in vehicles and machinery. It functions by providing a rigid connection between the engine/transmission and the driven wheels or components, while also allowing for angular movement and compensation of misalignment through the use of U-joints. The drive shaft plays a crucial role in power transmission, torque and speed delivery, flexible coupling, length and balance considerations, safety, and maintenance requirements. Its proper functioning is essential for the smooth and efficient operation of vehicles and machinery.

China factory Drive Shaft with Center Bearing for CHINAMFG  China factory Drive Shaft with Center Bearing for CHINAMFG
editor by CX 2023-12-14

Drive Shaft

As one of the leading drive shaft manufacturers, suppliers, and exporters of mechanical products, We offer drive shaft and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of drive shaft.

Recent Posts